ADL, founded by designer Massimo Luca, focuses on creating doors that are not simply furnishing items, but which complete a room by becoming part of it. ADL doors stand out because they transform into doorways that sub-divide rather than divide spaces, at the same time connecting them, creating what Ludwig Mies van der Rohe defined as “flowing spaces”.
ADL is the aesthetic form that arises from the function of the product; it is the union between technology and design, between functionality and aesthetics. ADL doors are pure technology, starting with the devices and going right through to the materials. Each single construction detail is conceived and designed to reach increasingly higher objective levels, with innovative products.
One of the most popular collection from ADL stable is “The Mitica Collection”. This collection is characterized by its meticulous aesthetics, given to the aluminium profile that houses the central glass pane, and to the geometry of the door frame which is made with 18 mm wide uprights and 36 mm wide crosspieces. Thanks to the high construction technology and the historicity of the product, ADL Mitica Door Collection is available with all types of opening systems.
OPENING TYPES
SLIDING WITH SYNCHRONIZED DRAG
SLIDING
The guide pin of the sliding door goes inside the panel frame making it easier to assemble.
The lock support, painted in the same finish as the frame, also acts as a handle for opening the door. The latch is aligned on the outside of the lock support.
SWING CONTROL SYSTEM
The polyurethane wheel applied to the frame creates friction when in contact with the floor, helping the door to not swing on its own. (optional fitted on request)
The slot for the carriage of the sliding door is concealed by a plastic cover in the same finish as the frame.
SLIDING WITH SYNCHRONIZED DRAG
The guide pin of the sliding door goes inside the panel frame making it easier to assemble.
The lock support, painted in the same finish as the frame, also acts as a handle for opening the door. The latch is aligned on the outside of the lock support.
SWING CONTROL SYSTEM
The polyurethane wheel applied to the frame creates friction when in contact with the floor, helping the door to not swing on its own. (optional fitted on request)
The slot for the carriage of the sliding door is concealed by a plastic cover in the same finish as the frame.
SLIDING INSIDE THE WALL
The fully opening pocket door has a flat pull handle for closing the leaf.
The pocket door jambs can be combined with any counter frame available on the market.
On the pocket door inserted into traditional counterframes, aluminium, glass or wood architravers can be applied to both sides of the door jambs.
Even when there is a traditional counterframe, the ADL door jamb for cable covers makes it possible to create a minimal effect by applying a 12.5 mm thick sheet of plasterboard instead of a cable cover.
SWING
1.The offset pivot hinge allows the door to open to 180 degrees and is adjustable.
2.The hidden pivot hinge is completely concealed inside the leaf frame, limiting its to opening to a maximum of 120 degrees.
A concealed hinge with 3-axis adjustment is used in all the swing doors for corridor installation, with visible or recessed jamb.
Aluminium or glass architrave, or a 12.5 mm thick sheet of plasterboard, can be applied to the jamb for cable covers of the swing doors.
The wall flush jamb is available for either brick or plasterboard walls.
PIVOT HINGE
For pivot solutions without jambs, the handle model X52 is integrated into the leaf frame and painted in the same finish as the frame
1.A swing pivot hinge pivot hinge is applied directly to the hallway door jamb and is adjustable thanks to the telescopic structure of the latter.
2.The pivot hinge opening system without door jambs is integrated into the leaf frame profile.
BOOK
The ceiling-mounted rail also includes the pivot hinge of the first leaf.
The floor recessed guide is used when 2 or 3 bi-folding leaves all fold away to then same side (to the right or left depending on the choice of opening).
Handle model X5 is inside the leaf profile, and is painted in the same finish as the leaf frame.
The pair of leaves open almost completely, meaning they take up as little space as possible (with respect to the wall, the leaves with the door stop profile measure 17 cm).