Question 1

Door jamb vs door frame - What is the difference?

Accepted Answer

A door jamb and a door frame are two different things. So, what is a door jamb vs a door frame? A door frame is made of a mix of horizontal and vertical members placed on all sides to support a door. A jamb, on the other hand, is a flat surface that runs vertically on each side of the door frame. It is vital to the functioning of the door. This is where the hinges are placed to hang the door, and the striker plate on the opposite side helps you open, close, and lock your door.    Door jamb vs door frame  Door jamb   The jamb has two vertical boards and one horizontal board surrounding the door slab. Doors in certain types are pre-hung on an existing door jamb. Otherwise, you can add the jamb piece by piece to the frame.  Door frame   A door frame is a complete structure that encircles and supports a door. It includes the horizontal top where the door fits the vertical sides. The door's stability and flawless operation depend on the frame, which enables smooth opening and closing.       Door jamb vs door frame  Image Source: Wcmanet.com  The door is a combination of parts including the jamb. The parts are:       	Mullion: The term mull, short for mullion, describes the seam that separates the frames of two individual windows or a door and window when someone combines them.   	Head jamb: The head jamb is the upper horizontal portion of a frame.   	Sill: Sill is the portion of the door that is sealed and secured to the floor. Only doors on the outside have sills.   	Casing: The purpose of window and door casing trim is to conceal the spaces between an interior wall and a window or door frame.          Buy top-quality doors and door frames here or contact:     	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 2

How do you determine the right cabinet hardware size?

Accepted Answer

There are no hard and fast rules that can guide us on how to determine the right kitchen cabinet hardware size and placement, but there are a few pointers to assist you to figure out what will work for your cabinets. There are some terminologies you need to understand when looking to install cabinet hardware. They are:        	Centre-to-Centre is the measurement between the centres of each screw hole. When searching for new cabinet hardware, this is the most important measurement to look for.    	Overall Length is the distance between the pull's ends. This measurement is always longer than centre-to-centre and should be considered when determining the length of your cabinet hardware.     	Projection is the area between your door and the door knob. This is vital to remember so that your handles do not obstruct the flow of doors in your kitchen.        How to choose the right cabinet hardware size?        Kitchen cabinet hardware size guide  Image Source: Porch Daydreamer     Cabinet hardware sizes vary depending on your design choices. However, you should select a size that is both attractive and useful. If your cabinetry is already pre-drilled, you'll need to obtain hardware that fits the existing measurement. Otherwise, you're on your own when it comes to selecting the size of your cabinet hardware. Here are the guidelines for choosing the perfect cabinet hardware size:        	For oversized cabinetry (dimensions of 36″ or larger) - Longer length pulls (6”, 8”, 10” or 12”) or knobs (diameter of 1-1/2” or larger).   	For standard size cabinetry (dimensions of 12″ – 36″) - Pull sizes (3”, 4”, 96mm, and 128mm) and standard knob sizes (1 1/4″ or 1 3/8″).    	For small, specialized cabinetry (dimensions under 12″) - Smaller knobs under 1″ in diameter or T-pulls.               If you want to buy top-quality hardware fittings from the best brands at Wholesale Prices, click on the link given below :          Hardware Fittings        For more details, contact below:     	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 3

How to choose hardware for modular kitchens?

Accepted Answer

An otherwise flawless kitchen can severely suffer from careless hardware selection. Initially, choosing the right hardware fittings and cabinet material may seem like a simple step, but it can significantly enhance the appearance and functionality of your kitchen. When you are narrowing down your options for modular kitchen cabinet hardware, take these 6 factors into account.     Kitchen hardware style         Image Source: Emily Henderson on Pinterest     The style of your kitchen fittings should complement the other components of the kitchen's decor. Arched panels on your cabinets will look good with rounded pulls or round knobs. Long square hardware designs will look fantastic with simple flat shutters. Curved forms are typically more classic, whilst square styles tend to look more modern.     Kitchen hardware utility and comfort  All other considerations should come after comfort and functionality. Before making a purchase, make sure you use the hardware rather than just choosing it from a catalogue solely based on appearance. Check if the edges are jagged or sharp. Does it have enough room to fit your fingers through? Do "soft close" mechanisms actually close softly?     Kitchen hardware budget  Budget is always a major factor, but do not sacrifice functionality or quality in favour of less expensive solutions. Your hardware will experience significant wear and tear, so if you skimp on quality, it won't survive very long. In general, knobs cost less than pulls, and the cost will change according to the finishes you select (steel and chrome finish hardware are usually less expensive).     Hardware size         Image Source: Lindsey Mabry on Pinterest     Hardware is available in a variety of sizes. The dimension that matters is the space between the screws. This only applies to pulls, as knobs may be readily improved or exchanged. If you buy brass vine pulls with screws that are 21/4-inch apart and wish to replace them, you will have a difficult time finding a pull in that size. To avoid this, screw diameters range from 3-5 inches. Keep your hardware within the range of 14-inch increments.      Handle type         Image Source: Pinterest     Your kitchen's appearance and functionality may be affected by the handle style you choose. Pulls or lengthy handles are more practical for heavy-duty drawers because they help disperse the effort required to open a shutter or a drawer. Knobs are typically ineffective for wide and heavy drawers because they concentrate the force of the "pull" in one place.     Carcass material         Image Source: Pinterest     Apart from metal hardware fittings, another important item that needs your attention is the body of the kitchen cabinets. The material you choose as a carcass for your cabinetry will affect your whole kitchen aesthetic and user experience. Kitchen cabinet materials range from MDF, particleboard, and fibreboard to plywood and solid wood. After selecting your cabinet material, you also need to select a finish type from laminate, membrane, or polyurethane.     So, to learn more about kitchen planning or remodelling, read: Kitchen design layout             If you want to buy top-quality hardware for your modular kitchen from the best brands, click on the link given below to check your options and submit your inquiries:          Kitchen Fittings        For more details, contact below:     	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 4

What mistakes to avoid while designing custom cabinets?

Accepted Answer

Kitchens are the heart of the home and cabinets are an important element of creating a bespoke designer kitchen. However, at times the cabinet style can leave you feeling underwhelmed. The main mistakes people tend to make while designing custom cabinets are:         Image Source: Laurysen Kitchens        	Overlooking the design layout: It’s vital to follow the work triangle while customising cabinets. Also, filling walls with too many cabinets is a designing mistake that may make the place feel stuffy.    	Making poor colour choices: The colour scheme will affect the overall look of the space. Therefore, cabinets should blend with the kitchen decor.    	Failing to raise cabinets to the ceiling height: It results in a gap where dust might gather, making the space difficult to maintain.    	Compromising the hardware quality: It is important to choose good-quality hardware (hinges, knobs, etc.) as per the cabinet style.              Buy top-quality hardware fittings here or contact:     	     	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 5

What mistakes to avoid when selecting cabinet hardware?

Accepted Answer

While selecting cabinet hardware we have to take into consideration the design elements of the space. But many people tend to overlook a few important factors which can hamper the functionality of the cabinet.         Image Source: Signature Home Services       The most common mistakes made when selecting cabinet hardware are:      	Not trying and testing the hardware before purchasing.    	Failing to stick to the budget and compromising on quality.    	Using mismatching hardware, resulting in an uncoordinated look.     	Following trends because what works for someone else may not work for you.    	Overlooking the finishing; be cautious as sharp edges can hurt you.    	Buying products that don’t fit in with the standard screw sizes.    	Choosing style over comfort, pick products that are a blend of both.               Buy top-quality hardware fittings here or contact:     	Email: support@buildingandinteriors.com     	WhatsApp: +91 9811057547 (Message only)

Question 6

How to adjust misaligned kitchen cabinet handles?

Accepted Answer

Are your kitchen cabinet handles misaligned? Don't worry this can be fixed, giving your kitchen the desired aesthetic appeal. Here are some top tips to re-align your cabinet handles and knobs:        Placement of  hardware  Image Source: Renovated Faith        	Use masking tape to measure the spirit level. Mark the centre points of the hole on the tape. Remove the tape and apply it to your cabinet, using a spirit level to re-adjust.   	Drill a hole on the marked point.   	Fill the old hole with an elegant backplate.    It is always ideal to mark the dimensions of the handles on the cabinet door. As a rule of thumb, you want your cabinet hardware to be placed 50 mm away from the top and sides of the door.       Learn more about furniture fittings.             Buy top-quality hardware fittings here or contact:     	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 7

How to select the right cabinet hinge type? | Building and Interiors

Accepted Answer

Cabinet hinges are crucial parts of storage systems. Choosing the right cabinet hinge type can be a little daunting because of the many styles available. To ensure the right choice you have to consider 2 things:  1. Construction type: There are two types of cabinets - face frame and frameless cabinets. Both of them require different types of hinges, such as corner hinges, concealed hinges, etc.  2. Cabinet door type: Based on the type of door, hinges can be of the following types:       	Overlay hinges   	Butt hinges    	Surface-mounted cabinet hinges   	Inset hinges   	Offset hinges          Different types of cabinet hinges  Image Source: Rockler       Learn about the different cabinet hinge types in detail.               If you want to buy top-quality door fittings from the best brands at Wholesale Price, click on the link given below:          Door Fittings        For more details, contact below:       	Email: support@buildingandinteriors.com     	WhatsApp: +91 9811057547 (Message only)

Question 8

What are the different types of door latches? | Building and Interiors

Accepted Answer

A door latch is attached to the frame of the door, to help keep it closed. Door latches fasten the door to other types of surfaces like walls or wooden frames.        Antique Chain Latch  Image Source: Adobe Stock     Door latches add security and keep away trespassers. The latches are available in different sizes as per usage. The commonly available types of door latches are:       	Internal Door Latch   	Tubular Latch   	Flat Latch   	Roller Bolt Latch   	Spring Loaded Latch   	External Door Latch   	Sliding Bolt Latch   	Rim Latch   	Hook and Eye Latch   	Chain Latch   	Swing-Bar Latch   	Gravity Latch   	Mortise Latch    See more about door latches.               If you want to buy top-quality hardware fittings from the best brands at Wholesale Price, click on the link given below:          Hardware Fittings        For more details, contact below:       	Email: support@buildingandinteriors.com     	WhatsApp: +91 9811057547 (Message only)

Question 9

What are the different door handle types? | Building and Interiors

Accepted Answer

Door handles come in many different types and finishes. Most are easy to install and add the final finishing touch to your home.  The different types of a door handles are:        Different handles  Image Source: Ironmongery Experts         	Lever on backplate handles: Traditional in style, these have a lever and a backplate.   	Lever on rose handles: These have levers with a square or circular rose.   	D pull handles: Fitted externally on a door. these come in different designs.   	Flush pull handles:  Mostly used for sliding doors.   	Doorknobs: These can be used with latches and locks to add to security.   	Thumb turns: Used mostly in bathrooms, it bolts in and out of the lock.   	Cabinet cup handles: Perfect for drawers and cabinets because of the grip they provide.   	Cabinet pull handles: These add to the design element.             Buy top-quality door hardware here or contact:     	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 10

How to choose the best door hardware? | Building and Interiors

Accepted Answer

One of the easiest ways to upgrade the design of your space is to select stylish door hardware. With so many designs available, choosing the best door hardware might be confusing.         Different styles of hardware  Image Source: Build     To choose the correct hardware for your doors you have to keep in mind the following factors.       	Choose a style and finish that matches your preferences.   	Measure the door thickness and the backset of the door. The backset is the space between the edge of the door and the hole. A standard backset is 2 3/4 or 2 3/8 inches.   	Select the hardware as per the functionality. Privacy door handles are important for spaces where you want to limit access. You can place dummy knobs for decorative purposes in places that do not require privacy.             Buy top-quality door fittings here or contact:     	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 11

Does the main door hardware have to match the house?

Accepted Answer

According to design experts, it is not necessary to match the main door hardware with the rest of the house. In most cases, you will find that the front door hardware has a different finish compared to the other doors. The fittings used for the front door are chosen as per its design.        Different handles for the same door  Image Source: Hiatt Hardware     It is also recommended to match the hinge colour with the colour palette used in the home decor as the main door is mostly closed and the fittings are only visible from inside the house.              If you want to buy top-quality door hardware from the best brands at Wholesale Price, click on the link given below:          Door Fittings        For more details, WhatsApp us or contact below:       	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 12

What are the different drawer slide types? | Building and Interiors

Accepted Answer

A drawer slide is a hardware fitting that allows a drawer to move into and out of the furniture in which it’s installed. Each drawer has a pair of slides fixed to it. When you open a drawer, it will glide along these slides. 6 different drawer slide types are available, namely:     Ball bearing        Ball bearing drawer slide  Image Source: Grass USA     Soft Close        Soft close drawer slide  Image Source: Hvpal Hardware     Under-mount        Undermount drawer slide  Image Source: Handyman's Daughter     Side mount        Sidemount drawer slide  Image Source: CS Hardware     Center mount        Center mount drawer slide  Image Source: Ubuy     Roller        Roller drawer slide  Image Source: Hettich        Different types of drawer slides  Image Source: Home Woodworker     All drawer slide types have their own pros and cons. Ball bearing slides are inexpensive while under-mount slides are easy to install. Similarly, center-mount slides give a compact look as they stay hidden.             If you want to buy top-quality hardware fittings from the best brands at Wholesale Price, click on the link given below to check your options and submit your inquiries:          Hardware Fittings        For more details, WhatsApp us or contact below:       	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 13

What is the strongest type of hinge? | Building and Interiors

Accepted Answer

The door hinge is a piece of hardware that connects the door to the frame, allowing it to open and close properly. The strongest type of hinge is the butt hinge. It is designed to provide stability to heavy doors that are commonly used in residential and commercial buildings. These types of door hinges can bear heavy loads up to 120 kgs. These hinges come with two leaves and a knuckle.        Types of door hinges  Image Source:  GXT Store     The ball bearing hinge (a type of butt hinge) is considered the strongest heavy-duty hinge making it a top choice for entry doors.  These hinges can also be used for doors that are 4 feet wide.             If you want to buy top-quality hardware fittings from the best brands at Wholesale Price, click on the link given below:          Hardware Fittings        For more details, WhatsApp us or contact below:       	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 14

What are the various sliding door parts / components?

Accepted Answer

A sliding door is easy to use, but all of its components must be aligned for it to function properly. These doors don't require any hinges to operate. Also, they do not need extra space for the door arc. To ensure that the door construction is safe, all components should align with the rest. The names of the components of a sliding door are as follows:        Names of sliding door components  Image Source: Hardware Hut     Components of a sliding door  1. Track: The track line should ideally be twice the length of the door to ensure its works effectively. Also, multiple track lines are used when the doors move side-by-side.  2. Brackets: You can choose from wall brackets or soffit brackets. Since the number of brackets is selected on the basis of the track length, check the bracket interval to ensure a perfect fit.  3. Jump Block: Mounted on top of a door, a jump block does not hamper its functioning. Although it does not affect the operation of the door, it fills the void between the door and the track so that the door does not fall off when it slides.  4. Wheels: External doors require steel wheel components, while internal doors require nylon wheels.  5. Hangers and fixing plates: Sliding doors require 2 pieces of hangers per door. Fixing plates are used to fix the hangers to the top of the doors.  6. Stops: Used inside the track, the stop limits the door movement. Additionally, a wall stop prevents the hitting of a door.  7. Bottom guide: Installed on the floor, the bottom guide component prevents the sliding door from swinging.             If you want to buy top-quality door fittings and hardware from the best brands at Wholesale Price, click on the link given below :          Door Fittings        For more details, WhatsApp us or contact below:       	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 15

What is the ideal cabinet pull placement? | Building and Interiors

Accepted Answer

The placement of a cabinet pull in the correct way is aesthetically pleasing and practical. Pulls provide a modern look and are easy to grasp. The 3 different types of cabinet pull and their proper position are described below.        Cabinet pull placement and position  Image Source: Mockett               1. Standard Pulls: The most common type of pulls are installed horizontally. For drawers smaller than 24 inches, the ideal pull placement is in the centre.                2. Finger Pulls: Finger pulls are mounted on the edges of the cabinet doors and drawer with just a part visible. For drawers bigger than 24 inches, you might want to use 2 finger pulls.          3. Cup pulls: Shaped like cups, the ideal placement of these cabinet pulls is on the lower drawers. It is installed in the top third of the doors.                            Buy top-quality hardware fittings here or contact:     	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 16

What is the standard door knob size? | Building and Interiors

Accepted Answer

Selecting the perfect door knob is more than simply a matter of aesthetics. It is important to make sure that the hardware you purchase is of the correct size so that the door can function properly. The standard size for a door knob is a diameter of  2 3/8 inches or 2 3/4 inches and these will fit doors that have a thickness from 1 3/8 inches to 1 3/4 inches.        Door Knob Size Guide  Image Source: Period Homes     Before purchasing a new door knob you should consider all these standard sizes to ensure a perfect fit. Most door knobs available are adjustable and therefore can fit in with different door sizes.             If you want to buy top-quality hardware fittings from the best brands at Wholesale Price, click on the link given below :          Hardware Fittings        For more details, WhatsApp us or contact below:       	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 17

Should door knob hardware match throughout the house?

Accepted Answer

Door knobs hardware is available in various different designs, and it is essential to choose the right product as per the design scheme of your home. While some people may prefer using the same style of door knobs throughout their home, others may find it redundant and want the knobs to match the interior design of the space. To combat this problem, one can go for a split finish.  The split finish is an ideal technique where your door knob hardware will have the same design as the other ones in your home but the finish will be in accordance with the design of the room. The inside and outside of the door will have the same knob but with a different finish.        Different finishes of the same knob  Image Source: Corston           Buy top-quality door hardware here or contact:     	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 18

Do door knobs have to match hinges? | Building and Interiors

Accepted Answer

While there is no fixed rule as such, it is advised that if your hinges are exposed, they should match your door knobs. Matching door hardware is a designer's trick to improve your home's overall aesthetic.        Matching Door Hardware  Image Source:  Rocky Canyon Rustic     Although door knobs don't have to match door hinges, there are several advantages to matching them:       	Gives a uniform look: Matching hardware in a home gives a sense of continuity and increases the aesthetic value.   	More cost-effective: Upgrading door hardware can be quite expensive so it is better to buy in bulk with matching finishes.   	Reflects your personality: An easy way to showcase your personality in a home is by selecting a preferred matching door hardware set.               If you want to buy the best hardware fittings  at Wholesale Price, click on the link given below :          Hardware Fittings        For more details, WhatsApp us or contact:       	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 19

Should I use pulls or knobs as cabinet handles?

Accepted Answer

When deciding whether to select a knob, a pull, or both, there are no hard and fast rules to follow. One smart solution is to use pulls for all kitchen drawer handles and knobs for all cabinet doors. Using a pull to open a drawer is significantly more pleasant. By doing this, you can grab the handle with your entire hand rather than just your fingers. With all of your pots, pans, dishes, etc., drawers may become very heavy, so this is very handy.        Kitchen drawer with pulls and cabinet doors with knobs  Image Source: TriggerPhoto     You can confine yourself to using only pulls or only knobs also. A trend that was seen in many kitchens earlier, is the usage of knobs for all the cabinet handles. In modern kitchens, mostly all pulls are used because of their contemporary look and easy operation.  To learn more about kitchen design, cabinet, and handles, read: Kitchen design layout guide             If you want to buy top-quality hardware fittings from the best brands at Wholesale Price, click on the link given below to check your options and submit your inquiries:          Hardware Fittings        For more details, WhatsApp us or contact below:       	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

Question 20

What are the different types of hardware finishes? | Building and Interiors

Accepted Answer

Take hardware finish into serious consideration when working on a new kitchen cabinet or updating an old installation; it could make or break the space! Here is a list of the 5 most common hardware finishes.       	Polished Brass: Polished Brass is a timeless style with a retro appeal that is currently having a comeback in bathroom decor.   	Antique Brass: Rich brown tones and a golden glow combine to make antique brass the perfect choice for traditional-styled rooms.   	Satin Nickel: With warm undertones and gloss, satin nickel has a luxurious feel. It complements stainless steel appliances well, making it a fantastic option for kitchens.   	Chrome: This finish provides a sleek, contemporary appearance. Its bright, tidy appearance makes it a favourite in bathrooms.   	Matte Black: Matte Black strikes a balance between traditional and modern design that is both consistently striking and adaptable.          Door hinge finishes               If you want to buy top-quality hardware fittings from the best brands at Wholesale Price, click on the link given below to check your options and submit your inquiries:          Hardware Fittings        For more details, WhatsApp us or contact below:       	Email: support@buildingandinteriors.com   	WhatsApp: +91 9811057547 (Message only)

FITTINGS & ACCESSORIES

Door jamb vs door frame – What is the difference?

How do you determine the right cabinet hardware size? | Cabinet hardware size guide

How to choose hardware for modular kitchen?

What are the mistakes to avoid while designing custom cabinets?

What are the mistakes to avoid when selecting cabinet hardware?

How to adjust kitchen cabinet handles that are misaligned?

How to select the right cabinet hinge type?

What are the different types of door latches?

What are the different door handle types?

How to choose the best door hardware?

WEB STORIES

Door jamb vs door frame – What is the difference?

Task lighting vs ambient lighting: What is the difference?

What are the most common kitchen problems and how to solve them?

How is false ceiling measurement done?

FEATURED ARTICLES

LOCATIONS

Subscribe to our Newsletter